X20 system
3 X20 system
3.1 System characteristics
X20 modules consist of three submodules to provide maximum ease of use throughout their entire lifecycle.
This division into bus module, electronics module and terminal block has several advantages.
•
Preconfigured for different machine types
The X20 system bus modules are the basic platform for many machine variations. The electronics modules
used determine the machine's degree of expansion. The software automatically detects this degree of
expansion and makes the necessary functions available. Handling a range of different machine variants
could not be easier.
•
Industrial control cabinet construction
X20 system terminal blocks are separate from the electronics module and make it possible to pre-wire the
entire control cabinet. This is especially ideal for series-produced machines.
•
Effortless maintenance
X20 modules can be easily exchanged to simplify troubleshooting. The electronics modules can be replaced
during operation (hot plugging). The wiring remains exactly the same thanks to the separate terminal blocks.
This method of quickly exchanging automation components reduces machine and system downtime.
Simple mounting
Robust modularity
Extensive product range
Galvanically isolated
Diagnostics
16-pin terminal block
Push-in terminals
Keying
Sophisticated top-hat rail
installation for optimal
system handling
Direct connection
between bus module and
terminal block
Allows optimal
customization for every
task definition
Safe operation in
the harshest conditions
On-site and remote via
sofware and
embedded parameter chip
Provides maximum
component density
Tool-free
operation of all standard
connection cross sections
Seamless plant and
customer encoding
8 Installation / EMC guide 1.36 (April 2021)
To Next Page
Loading...