2
BMP®61 Quick Start Guide
To install the battery:
Charge the battery for 4.5 hours before disconnecting
the power cord.
WARNING!
• Do not disassemble, replace components,
or mistreat the battery pack.
• Use only the BMP41-BATT rechargeable
battery pack in the BMP61 printer.
• Do not allow metal or other conductive
materials to touch the battery terminals.
• Do not use any charger or AC adapter other
than that specifically for use with the battery
pack.
• Do not expose batteries to temperatures
above 60° C (140° F), and keep away from
heat sources.
• Keep the battery pack away from water.
• Store your battery pack in a cool, dry place.
• Keep the battery pack out of the reach of
children.
• The battery pack must be recycled or
disposed of properly according to federal,
state, and municipal regulations.
To Next Page
Loading...
