ENGLISH 11 / 73 CAP. 3 - SAFETY CONDITIONS
HOSE CONNECTIONS: Hoses may contain pressurised refrigerant. Before changing the service
couplers, check the respective pressures in the hoses (pressure gauge).
Before connection to a car A/C system, to an external tank/vessel, check that the quick couplers
are closed (unscrewed HP and LP valves).
Scrupulously follow the instructions on the equipment's display.
QUICK COUPLERS CLOSING/OPENING:
MAINTENANCE/GENERAL CLEANING: The tool has to be serviced at the intervals indicated by
the tool itself. These controls include also a leak self-test that the tool performs automatically.
The service station maintenance has to be performed according to the procedures described in
this manual and to the current safety regulations.
Use only Brain Bee original parts.
When the equipment requires the dryer filter and the vacuum pump oil change, you have to be
careful in the replacement.
A/C service station maintenance can be carried out exclusively by a trained operator or by a
service man of a Brain Bee certified seller. If the maintenance is not performed according to the
expected schedule, the tool will be blocked.
Do not use chemical agents for the service station cleaning as they could attack the material or
the surface.
Closing (detach from the vehicle):
counter-clockwise
Opening (connect to the vehicle):
clockwise
To Next Page
Loading...