ENGLISH 45 / 73 CAP. 11 - AUTOMATIC CYCLES
CAP. 11 - AUTOMATIC CYCLES
11.1 AUTOMATIC A/C SYSTEM SERVICE
It is necessary to connect both the LP (low pressure) – and HP (high pressure) couplers to the
vehicle A/C system (Screw the valves only when required by the A/C station).
Select the service mode (manual or automatic) and follow instructions.
When the (automatic) service mode is selected, the following screen page is displayed.
11.2 AUTOMATIC CYCLE (BUSES)
Upon tool switch-on, the menu of the database storing vehicles divided by maker, model, and
type of A/C system is displayed. (For the touchscreen use, see chap. 5.8).
11.2.1 Last cycle
It loads the parameters of the last automatic cycle
11.2.2 User-defined cycles
It allows loading the parameters of the automatic cycle previously saved by the user.
11.3 AUTOMATIC CYCLE (OTHER VEHICLES)
Upon tool switch-on, the menu of the database storing vehicles divided by maker, model, and
type of A/C system is displayed. (For the touchscreen use, see chap. 5.8).
11.4 Vehicle selection from database (for Other vehicles only)
Brain Bee offers customers purchasing a 9000 BUS PLUS the possibility of enhancing potentials
of the UNIT through the Autodata database. (cars and industrial vehicles only).
This database contains all data related to the A/C system of most vehicles. Hence, it will be
possible to speed up the recharge operations of the system with the aid of the data provided by
the database.
• Type of vehicles
o European and Asian
o America
o Australian (Australian vehicles database - option)
o Agri&Work (Agricultural machinery database - option)
• Maker
• Model
• Version / engine capacity
• Year
• System
11.5 Last cycle
It loads the parameters of the last automatic cycle
To Next Page
Loading...