CAP. 6 - TECHNICAL FEATURES 32 / 73 ENGLISH
CAP. 6 - TECHNICAL FEATURES
Vessels for R134a fluids
Capacity 40 l
Maximum operating pressure (PS) 20 bar
PED category (Dir.97/23/EC) II
Weight of gas content Scale
Maximum weight of gas content in the vessel 32 kg
Safety valve
Type AIRTEK - VS14NPT20HNBRPED4 20bar R
1/4 NPT
Calibration pressure 20 bar
PED category (Dir.97/23/EC) IV
Containers for oil and tracer
Recovered oil container capacity 1000 ml
New PAG oil hermetic container capacity 1000 ml
UV tracer hermetic container capacity 250 ml
Pneumatic circuit
Vacuum pump flow rate 10 m
3
/h
Vacuum level 0,05 mbar
Vacuum pump oil quantity 0,5 l
Vacuum pump oil life 60h – extensible to max 1000 h with LONG
LIFE PUMP procedure
Refrigerant recovery compressor cubic capacity 14 cc
Dryer filter life 150 kg of R134a recovered
Non-condensable gas vent Automatic with AIR PURGE SYSTEM function,
with solenoid valve
HP and LP taps automatic
Safety pressure switch
Type 13/18bar ¼SAE
Trip pressure 18 bar
PED category (Dir.97/23/EC) IV
Pneumatic fittings
Net length of external HP and LP hoses 4.5 m
HP and LP pressure gauges Analog 80 mm, pulse-free, 1.0 class
Vessel pressure gauge Digital
Interface and software
Display Graphic 4,3” WideScreen 480x272, 65536
colours
Keypad Touch screen
Printer Thermal, 24 columns
Updating USB type-A with USB 2.0 key
USB type-B with direct connection to PC.
Functions
R-134a recovery, exhausted oil recovery, vacuum
pump, recharge, oil and tracer injection
Automatic and manual
Single/multipass recycle modes Selection available from menu
Recovered oil measurement Automatic weighing,
1 g resolution, ± 5 g accuracy
with mechanical overload protection
New oil automatic injection Automatic weighing,
To Next Page
Loading...