BrainBee OPA-100 - User Manual

SERVICE MANUAL
TECHNICAL INFORMATION
REV. 1.0
SMOKEMETER
OPA-100

BrainBee OPA-100 Specifications

General

Brand	BrainBee
Model	OPA-100
Category	Measuring Instruments
Language	English

Summary

1 INTRODUCTION

2 SAFETY GENERAL INFORMATION

2.1 IMPORTANT INFORMATION FOR SAFETY

Rules for individual safety during installation and execution of procedures.

2.2 SYMBOL

Explains safety symbols found on the devices.

3 INSTALLATION AND SERVICE OPERATIONS

3.1 VERIFY COMPONENTS

Verifies the availability of components for system installation.

3.2 SOFTWARE UPDATE

Instructions for updating the instrument software.

3.3 INITIAL VERIFICATION

Perform initial verification tests on the instrument.

3.3.1 EXTERNAL VISUAL CHECK

Perform an external visual check of the instrument.

3.3.2 INTERNAL VISUAL CHECK

Internal visual check for authorized technicians.

3.3.3 CHECK POWER SUPPLY

Check the power supply voltage and frequency.

3.3.4 CHECK WARM-UP LOCKOUT

Check the warm-up lockout activation.

3.3.5 CHECK ZERO AUTOMATIC ADJUSTMENT

Verify the automatic zero adjustment functionality.

3.3.6 EXECUTE FILTER CALIBRATION

Perform filter calibration procedure.

3.4 SUBSEQUENT VERIFICATION

Procedures for subsequent verification of the instrument.

3.5 ROUTINE TESTING

Guidelines for performing routine tests on the instrument.

4 TECHNICAL DOCUMENTS

4.1 A SYSTEM OVERVIEW

Provides an overview of the instrument system components.

4.2 INTERNAL CABLES

Details and diagrams of internal cables and their connections.

4.2.1 Cables View

Visual reference of internal cable connectors and layout.

4.2.2 124010001700 Internal OMNIBUS cable for Power supply and RS485 network

OMNIBUS cable for Power supply and RS485 network.

5 OTHER INFORMATION