To Next PageTo Next Page
Need help?Do you have a question about the BrainBee AGS 200 and is the answer not in the manual?
Critical personal safety guidelines for users.
Safety precautions specific to the instrument's operation and maintenance.
General operational notes and advice for using the instrument.
Explanation of various safety and marking symbols used in the manual.
Description of the external appearance of the AGS-200 unit.
Detailed technical specifications of the AGS-200 instrument.
Instructions on how to unbox and set up the AGS-200.
Steps for installing the software for AGS-200 operation.
Detailed instructions for software installation in DOS.
Detailed instructions for software installation in Windows.
Configuration options and settings for the instrument.
How to use the program on a PC or OMNIBUS system.
Performing continuous gas readings.
Reading gas values according to CEE 92/55 standard.
Procedure to check the calibration due date.
Performing a leak test on the system.
Performing a residue HC test.
Checking the efficiency of the O2 sensor.
Performing various special tests.
Instructions for cleaning the instrument's filtering system.
Procedure for replacing the activated carbon filter.
Details on the mandatory annual inspection of the analyzer.
List and description of optional accessories available for the instrument.
Critical personal safety guidelines for users.
Safety precautions specific to the instrument's operation and maintenance.
General operational notes and advice for using the instrument.
Explanation of various safety and marking symbols used in the manual.
Description of the external appearance of the AGS-200 unit.
Detailed technical specifications of the AGS-200 instrument.
Instructions on how to unbox and set up the AGS-200.
Steps for installing the software for AGS-200 operation.
Detailed instructions for software installation in DOS.
Detailed instructions for software installation in Windows.
Configuration options and settings for the instrument.
How to use the program on a PC or OMNIBUS system.
Performing continuous gas readings.
Reading gas values according to CEE 92/55 standard.
Procedure to check the calibration due date.
Performing a leak test on the system.
Performing a residue HC test.
Checking the efficiency of the O2 sensor.
Performing various special tests.
Instructions for cleaning the instrument's filtering system.
Procedure for replacing the activated carbon filter.
Details on the mandatory annual inspection of the analyzer.
List and description of optional accessories available for the instrument.
General| Lambda Calculation | Yes |
|---|---|
| Temperature Compensation | Automatic |
| Gases Measured | CO, HC, CO2, O2 |
| Resolution | CO: 0.01 % Vol; HC: 1 ppm Vol; CO2: 0.01 % Vol; O2: 0.01 % Vol; NOx: 1 ppm |
| Measurement Range | CO: 0 - 10 % Vol; HC: 0 - 20000 ppm Vol; CO2: 0 - 20 % Vol; O2: 0 - 25 % Vol; NOx: 0 - 5000 ppm |
