CHAP. 6 – PRELIMINARY OPERATION 24 / 24 ENGLISH
ags-200
6.2 HOW TO INSTALL THE SOFTWARE
If you have an OMNIBUS-500, OMNIBUS-500/S or OMNIBUS-400 instrument there is
no need to install any particular software as these instruments already have programs
able to operate with AGS-200 (refer to the instruction manuals of the instruments for the
necessary settings).
If you have a computer, you will need to install the program used to display the data
transmitted by AGS-200 and pilot the instrument itself.
The software allowing use of a Personal Computer comes in a suite that also includes
the programs that handle the other Brain Bee instruments and is supplied in two
formats: Software for use in the Windows environment and Software for use in the DOS
environment. The programs act in a perfectly identical way both in relation to the
functions carried out and the masks displayed.
6.3 INSTALLATION IN THE DOS ENVIRONMENT
The software required to operate AGS-200 in the DOS environment is supplied in two
different media: Floppy disk and CD-ROM.
To install the software using diskettes, just insert the first disk, open the install.bat file
and change the disk when requested.
If the Windows program is installed in the computer, you can still install the software in
the DOS environment. Just insert the CD-ROM in the relative driver and open the
index.htm file (this file will be automatically opened if the autorun function is activated).
As soon as the installation mask appears, press the key on a level with the words
omniBUS-800 DOS and installation will take place in a fully automatic way.
6.4 INSTALLATION IN THE Windows ENVIRONMENT
The software required to operate AGS-200 in the Windows environment is supplied on
CD-ROM.
To install the software, just insert the CD-ROM into the relative driver and open the
index.htm file (this file will be automatically opened if the autorun function is activated).
As soon as the installation mask appears, press the key on a level with the words
omniBUS-800 Win and installation will take place in a fully automatic way.
6.5 SETTINGS
Once the software has been installed, a few settings are required which can also be
varied by the operator. All the indications on the keys described below are valid for both
the "Omnibus" version and the Personal Computer version where the mouse can also
be used.
To Next Page
Loading...