CHAP. 3 - SAFETY 8 / 8 ENGLISH
ags-200
- Make sure that you do not touch live parts of the vehicle when carrying out
inspections and adjustments with the engine running. -
DANGER OF INTOXICATION
If subjected to high temperatures (over 250 <198>C or owing to fire outbreaks), the
pipes used to sample exhaust gas release a highly toxic gas which can be harmful for
the health if inhaled.
SAFETY MEASURES:
- Immediately consult a physician if you inhale this gas.
- Wear neoprene or PVC gloves to eliminate combustion residues.
- The remains of fire outbreaks can be neutralized with a solution of hydrated lime.
This leads to the formation of calcium fluoride which can be easily removed with water.
3.2 IMPORTANT INFORMATION ABOUT THE SAFETY OF THE
INSTRUMENT
The work and operations described below are not permitted when the Iinstrumrnt is
used as, in certain circumstances, they can endanger persons and lead to permanent
damage to the instrument itself.
- It is forbidden to remove or obliterate the decals
and/or danger signs affixed to the instrument;
- It is forbidden to cut out the safety devices with
which the instrument is equipped;
- Only use original fuses with the indicated ampere
capacity! The instrument must be immediately
disconnected if the electricity supply is faulty.
Defective fuses must not be repaired or cut out.
They must be replaced with fuses of the same type.
- The electrical components of the instrument must be
inspected/checked at regular intervals. Defects,
such as loosened connections or burnt wires, must
To Next Page
Loading...