BrainBee AGS 200 - CHAP. 3 - SAFETY CONDITIONS

ENGLISH 3 / 3 CHAP. 2 - INDEX
a
gs-200
CHAP. 2 - INDEX
CHAP. 1 - GENERAL INFORMATION ...........................................................................1
CHAP. 2 - INDEX ............................................................................................................3
CHAP. 3 - SAFETY CONDITIONS..................................................................................5
3.1 IMPORTANT INFORMATION CONCERNING PERSONAL SAFETY...........5
3.2 IMPORTANT INFORMATION ABOUT THE SAFETY OF THE
INSTRUMENT .................................................................................................................8
3.3 GENERAL NOTES ........................................................................................9
3.3.1 INSTALLATION .......................................................................................9
3.3.2 IMPORTANT INFORMATION ABOUT THE BATTERY (BOTH
INTERNAL AND EXTERNAL).................................................................................9
3.3.3 IMPORTANT INFORMATION ABOUT OPERATING SAFETY .............11
3.3.4 WHEN THE INSTRUMENT IS NOT USED ...........................................12
3.3.5 CLEANING ............................................................................................12
3.4 SYMBOLS ...................................................................................................13
3.4.1 SAFETY.................................................................................................13
3.4.2 MARKING ..............................................................................................13
CHAP. 4 - GENERAL DESCRIPTION ..........................................................................15
4.1 EXTERNAL ASPECT OF AGS-200.............................................................15
4.1.1 EXTERNAL ASPECT OF AGS-200.......................................................15
4.1.2 ACCESSORIES.....................................................................................17
CHAP. 5 - GENERAL SPECIFICATIONS.....................................................................19
5.1 GENERAL SPECIFICATIONS.....................................................................19
CHAP. 6 - PRELIMINARY OPERATIONS....................................................................21
6.1 INSTALLATION ...........................................................................................21
6.2 HOW TO INSTALL THE SOFTWARE .........................................................24
6.3 INSTALLATION IN THE DOS ENVIRONMENT ..........................................24
6.4 INSTALLATION IN THE W
INDOWS
ENVIRONMENT ...................................24
6.5 SETTINGS...................................................................................................24
6.5.1 GARAGE DATA ENTRY........................................................................26
6.5.2 DATE AND TIME SETTING...................................................................27
6.5.3 SERIAL PORT SET-UP.........................................................................28
6.5.4 REVOLUTION COUNTER SET-UP.......................................................29
CHAP. 7 - USE OF THE INSTRUMENT .......................................................................31
7.1 USE OF THE PROGRAM IN A PERSONAL COMPUTER OR IN OMNIBUS
31
7.1.1 GAS READING IN CONTINUOUS MODE.............................................32
7.1.2 GAS VALUE READING IN COMPLIANCE WITH STANDARD CEE
92/55 34
7.1.2.1 VEHICLE DATA ENTRY ...................................................................................................... 34
7.1.2.2 ENVIRONMENTAL TEST CONDITIONS ............................................................................ 35
7.1.2.3 RESIDUE HC TEST ............................................................................................................. 36
7.1.2.4 VEHICLE ENGINE TEMPERATURE TEST......................................................................... 37
7.1.2.5 GAS READING.....................................................................................................................38
7.1.2.6 PRINT-OUT OF RESULTS .................................................................................................. 39
7.1.2.7 EXHAUST LIMITS................................................................................................................ 39
7.1.3 HOW TO CHECK THE CALIBRATION DUE DATE ..............................40
7.1.4 LEAK TEST ...........................................................................................41
7.1.5 RESIDUE HC TEST ..............................................................................42