To Next PageTo Next PageWhy is the volume too large when using my BRAND Transferpette Laboratory Equipment?
If the BRAND Laboratory Equipment is dispensing a volume that is too large, ensure that you are not pushing the pipetting button too far. Proper handling is essential.
General| Brand | BRAND |
|---|---|
| Model | Transferpette |
| Category | Laboratory Equipment |
| Language | English |
Pipette performance is guaranteed with high-quality pipette tips.
Instructions for correctly fitting the pipette tip and checking for leaks.
Description of how to set the volume on the pipette.
Instructions for the correct hand posture during pipetting.
Instructions for firmly pressing the ejector cap to remove the tip.
Step-by-step guide on how to aspirate a sample using the pipette.
Instructions for dispensing the aspirated liquid from the pipette.
Recommended schedule for routine checks and maintenance tasks.
Instructions for proper lubrication of the plunger with silicone oil.
Instructions for adjusting fixed-volume models using the calibration key.
Instructions for adjusting variable-volume models.
Instructions for conditioning the pipette before performing volume tests.
Steps for performing the volume test using a weighing balance.
Formulas for calculating mean value and mean volume.
Formula for calculating accuracy (A%).
Formula for calculating standard deviation.
Formula for calculating coefficient of variation (CV%).
Step-by-step instructions for cleaning pipettes up to 200 µl.
Instructions for autoclaving pipettes up to 200 µl, including continuations on page 23.
Instructions for autoclaving pipettes of 200 µl upwards.
Addresses issues with dripping tips or leaking instruments.
Solves issues where the instrument aspirates too little liquid.
Solves issues with delivered volumes being too low.
Addresses problems with slow or no suction.
Solves issues with delivered volumes being too high.
Catalog of BRAND pipette tips available in bulk packaging.
Specific instructions for returning instruments from outside the US and Canada.
Warranty information specific to the US and Canada.
