CHANGING OIL
Drain the uid through the drain holes under the rear
axle case and rear axle housing. Supply the uid through
the ller hole behind the hydraulic case.
*Transmission oil can be used for the hydraulic system
and for the power steering unit.
* Make sure to use the genuine Branson transmission
uid.
Drain the oil when oil is warm but be care-
ful. If oil is hot, there is a risk of getting
burnt.
CAUTION
PERIODIC MAINTENANCE & ADJUSTMENT
00 OPERATORS MANUAL (040512).indd 119 4/12/2012 10:19:55 AM
To Next Page
Loading...
