Why can't I lower the implement on my Branson 6640C?
If the implement on your Branson Tractor cannot be lowered, contact the dealer for repair if the cylinder is damaged. Ensure the hydraulic stop/slow return valve is set to 'Open'. If the control valve is dusty or clogged, consult the dealer for repair. Also, move the position control lever to the releasing direction if it is on the shallowest position.
What to do if the coolant warning lamp is on in my Branson Tractor?
If the coolant warning lamp is on during operation of your Branson Tractor, refill the coolant if the level in the reservoir is low.
Why can't I lift the implement on my Branson 6640C Tractor?
If the implement on your Branson Tractor cannot be lifted, turn the hydraulic stop/slow return control dial to the left. Check if the transmission fluid level is low and refill if necessary. Tighten the filter case or connection parts if air is taken in the intake pipe system, and replace the pipe or O-ring if damaged. Clean or replace the oil filter if it is clogged. For a defective hydraulic pump or a dusty control valve with a damaged O-ring, contact the dealer for repair.
Why is the engine power too weak in my Branson 6640C?
If the engine power of your Branson Tractor is too weak, inspect the air cleaner for clogs. If the nozzle is stained with carbon, contact the dealer for repair.
Why is the engine revolution irregular in my Branson Tractor?
If your Branson Tractor's engine revolution is irregular, bleed the air in the fuel system and replace the fuel. If the injection nozzle is clogged, have it repaired or replaced. Also, if the fuel filter is clogged, have it washed or replaced.
Why is the engine oil warning lamp on in my Branson 6640C?
If the engine oil warning lamp is on during operation of your Branson Tractor, first refill the engine oil if the level is low. If the oil level is adequate, the viscosity of the engine oil may be low, requiring you to replace it with oil of proper viscosity. If the issue persists, the pressure switch may be defective and need replacement. In case the oil pump is defective, contact your dealer for repair.
What to do if my Branson Tractor motor starts, but the engine does not?
If the engine of your Branson Tractor starts but the engine does not fully start, ensure that the fuel tank is filled and drain any air from the fuel lines. If the fuel is mixed with air, drain the air from the fuel system. If the engine runs only when the reducer lever is pulled, charge the battery.
Why is my Branson Tractor engine overheating?
If the engine of your Branson Tractor is overheated, start by refilling the coolant and engine oil. Check the fan belt for looseness or damage and adjust or replace it as needed. Clean the radiator core if it's clogged. Finally, reduce the load if the engine is running under too much load.
Identification and operation of various switches and levers on the tractor.
Description and usage of the tractor's control pedals for operation.
Controls operated by the right hand for tractor functions.
Controls operated by the left hand for tractor functions.
Miscellaneous controls and features of the tractor not covered elsewhere.
Essential checks to perform before starting tractor operation for safety.
Procedures for starting and safely stopping the tractor engine.
Precautions and guidelines for driving the tractor on roads.
Safety measures for operating the tractor on slopes.
Procedures for entering and leaving paved surfaces safely.
Safe turning procedures on paved areas.
How and when to use the differential gear lock for traction.
Safe procedures for loading and unloading the tractor.
Guide to attaching the tractor's 3-point linkage system.
Safety measures when connecting tractor implements.
How to adjust the tractor's wheel tread for different conditions.
Information and precautions regarding the power steering system.
Procedures for storing the tractor for extended periods.
A schedule detailing maintenance tasks based on running hours.
Charts for recommended oils, greases, and coolants.
Procedures for checking and changing engine and transmission fluids.
Instructions for replacing filters and coolant.
Maintenance procedures for other key tractor components.
Diagnosing and resolving engine-related problems.
Issues related to clutch and brake systems.
Diagnosing problems with the hydraulic system.
Solutions for electrical system malfunctions.
Physical dimensions and weight of the tractor.
Engine details, electrical system, and other components.
Details on brake, transmission, PTO, and hydraulic systems.
To Next Page
General
