250 - 450 Sonifier Chapter 2: Introduction
User’s Manual 250/450 Sonifier Power Supply Front Panel
100-413-016 Rev. C 2 - 5
NOTICE
When using micro tips, maximum output control setting is 6.
3) ON/OFF
Switch
Applies main power to the unit. Lights when
power is on.
4) Loading Meter Indicates level of ultrasonic power delivered to
your sample.
5) Output control Controls the amplitude i.e. peak to peak motion,
of the ultrasonic vibrations. Clockwise rotation
increases amplitude. For further information,
refer to Table 6.2 Horn Amplitudes.
Table 2.1 Front Panel Device and Function
Item Function
To Next Page
Loading...
