Action Frequency
Wipe down the leatherette cover Regularly
Wipe away debris from the pre-filter inside the bath Once per week
Change the filter Every 4 weeks
Change the water and fully clean the bath Every 2-3 months
Full system flush Every 6 months
Change the UV bulb Once per year
Filter & UV bulb replacements can be purchased at www.brassmonkey.co.uk
Cleaning and
maintenance
The bath will require regular cleaning to ensure the
smooth running of the equipment and to maintain and
lengthen the water quality.
How the cleaning process works
The bath has a dual stage filtration system consisting of
a sediment filter and a UV filter. The water in your bath
constantly circulates through both of these. The filters
job is to keep the water clear and the UV’s job is to keep
the water free of pathogens. If there is a blockage in the
flow due to lack of cleaning you will find the bath will not
work eciently; the water will stop circulating and it will
become dirty.
The frequency at which you will need to change the filter
and the water depends on usage and how much bacteria
and debris is introduced into the bath. For 1 daily user,
our recommendations are in the table on the right.
Pre-filter
Wipe away debris from the pre-lter
The pre-filter is there to catch larger items before being circulated into the
filtration system. It is good practice to reach into the water with a soft clean
cloth and catch any debris that is caught on the pre-filter. In doing this, the
water will circulate smoothly. If it gets clogged, you will find that the water
quality will deteriorate and the water will struggle to flow around the unit.
It may eventually stop if it gets blocked.
Important!
12 Ice Bath Quickstart Guide 13Ice Bath Quickstart Guide
To Next Page
Loading...