To Next PageTo Next PageWhy are all the white LEDs on my Braun Epilator flashing?
If all the white LEDs on your Braun Epilator are flashing, it indicates that the product has reached the end of its lifetime, as the maximum number of flashes (300,000) has been reached.
What to do if my Braun Electric Shaver is broken or cracked?
If the Braun Electric Shaver appears broken, cracked, or defective, immediately stop using it. This is especially important if the device, the mains cord, or the power supply is damaged. If you're unsure about its safety or suspect any damage, do not use it.
What to do if Braun Epilator is broken?
If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
How to fix a Braun Epilator when the first LED flashes red?
If the first LED on the power bars of your Braun Epilator is flashing red, it means the removable treatment window reflector has been taken off. Replace the reflector to resolve the issue.
What to do if my Braun Epilator is broken?
If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
Why all white LEDs flash on Braun Epilator?
If all the white LEDs on your Braun Epilator are flashing, it indicates that the product has reached the end of its lifetime. The maximum number of flashes (300,000) has been reached.
Why is the first LED on my Braun Epilator power bar red?
If only the first LED illuminates red on the power bar of your Braun Epilator, it indicates an invalid skin tone reading. This means your skin is either too light or too dark for the device to be safely activated.
What does it mean if my Braun Epilator shows a red LED with white LEDs?
If the power bars on your Braun Epilator display a red LED along with individual white LEDs, this indicates a device error. Try removing and then reconnecting the power supply. If the error continues, the device requires professional attention.
What to do if Braun Hair Removal System doesn't work on small areas?
If your Braun Hair Removal System doesn’t work on small areas, it's likely because both skin tone sensors are not making contact with the skin. If the area you're trying to treat is too small or curved, the device may not be able to read a valid skin tone, preventing activation. Try repositioning the device to ensure both sensors are in contact with the skin.
How to fix Braun 6029 Hair Removal System when power bars do not light up?
If the power bars on your Braun Hair Removal System do not light up when the treatment window is placed on the skin, ensure the device is properly connected to an electrical outlet and is in Ready mode. Also, make sure that both skin tone sensors are making full contact with your skin. If necessary, adjust the device's position to ensure both sensors are in contact with the skin.
General| Wet & Dry | Yes |
|---|---|
| Type | Epilator |
| Operation | Cordless |
| Number of Tweezers | 40 |
| Massage Rollers | Yes |
| Pivoting Head | Yes |
| Speed Settings | 2 |
| Power Source | Battery |
| Charging Time | 1 hour |
| Included Attachments | Shaver head |
