Braun AESCULAP 3D EinsteinVision 3.0 - LED Light Source Operation; Connecting and Activating Light Lead; Adjusting Light Intensity; Removing Light Lead

AESCULAP® 3D EinsteinVision® 3.0
LED Light Source
On / Off
On / Standby
(Push)
Increase / Decrease
(Rotate)
Optional Light
Lead Tester
Display Window
Light
Aperture
Push light lead firmly into light aperture
(Do not rotate cable release)
Rotate clockwise to increase light output
Press light source control to
activate / Deactivate light output
Rotate anti-clockwise to decrease light output
Rotate cable release clockwise and pull
light lead, to remove from light source
Light source illuminates with green ring around the rotation switch when activated (On)