Braun Infusomat Space - Page 4

2 3
6. If priming is activated, press to prime on the
pump.
7. Note prompt to “Disconnect IV line from patient
before priming”, press to conrm.
8. Respond to “Priming stopped” message by conrming
with . Respond to “Repeat priming” prompt with
for “Yes” or for “No”.
PRIMARY INFUSION
1. “Continue last infusion?”, press for “Yes” or
for “No”.
2. If “Yes”, scroll to conrm each value using and
to conrm values. If no, press to program
new infusion.
3. Select Care Unit using and conrm with .
4. Select Patient Prole using and conrm
with .
5. Select “All drugs” or a drug category, using
and conrm with .
6. Select drug using and conrm with .
Navigate through the list with and or use
and to skip through the alphabet
(i.e. ABC-DEF).
7. Select drug concentration using and
conrm with .
8. If prompted, read and conrm clinical advisory
with .
9. Enter or edit infusion parameters by scrolling
to desired parameter and press to open the
value editor.