Breas Vivo 40 User Manual

44 Using the Vivo 40
Vivo 40 clinician’s manual
Doc. 003886 En-Us A-1e
5.5 Transferring Data between the Vivo 40 and a PC
Data can be transferred in three ways:
• Memory card
• iCom communication unit
• Vivo-PC data cable
To show alarm history and alarm set-
tings in home mode: Enter main
screen and press down button for
3 seconds.
Read the chapter “Electrical Safety” on page 10 carefully to make sure all
conditions are fulfilled and considered.
In order to view and present patient data correctly, the Breas Vivo PC Software
must be installed on the PC.
Instructions on how to manage data in the Breas Vivo PC Software can be found
in the software help.

Breas Vivo 40 Specifications

General

Type	Non-invasive ventilator
Modes	CPAP
Humidifier	Optional, integrated heated humidifier
Power Supply	100-240V AC, 50/60Hz
Internal Battery	Yes, optional
Battery Life	Up to 8 hours
Alarms	Low battery