brent 882 - Page 113

Brent 1082/882 — Parts
5-35
Please visit www.unverferth.com/parts/ for the most current parts listing.
ITEM DESCRIPTION PART NO. QTY. NOTES
1 Hood Weldment 268556B 1
2
Wear Ring Pad - Required when using 281566G/R Upper
Auger Tube Weldment to adapt the Seal on the Hood
268594 1
Wear Ring Pad - Required when using 281520G/R Upper
Auger Tube Weldment to adapt the Seal on the Hood
268282 1
3 Chute Strap 268597B 2
4 Flat Head 5/16-18UNC x 3/4 Socket Head Cap Screw 9001688 8
5 Trim Lock/Flap Seal 9005441 AR
Specify in Feet
(Approx 6' Required)
6 Self Lubricating Bushing 2.25 OD x 2.00 ID x 1.5 9005085 1
7 Rubber Auger Hood 9005408 1
8 Hex Nut/Large Flange 5/16-18UNC 91257 8 Grade 5
9 Capscrew 1/4-20UNC x 1 9390-005 15 Grade 5
10 Fender/Flat Washer 1/4" 9405-066 16
11 Fender Washer 5/16" 94763 14
12 Hex Nut/Large Flange 1/4-20UNC 97189 15 Grade 5
14 Sleeve Bushing 3/4 OD x 1/2 ID x 8 1/4 268590 1
15 Flat Washer 3/4 9405-104 3
16
Cylinder 1 1/2 x 8 9005135 1
Seal Kit 9005419 1
17 Hose Bracket 268732B 1
18 Lock Washer 1/2 9404-025 1
19 Capscrew 1/2-13UNC x 9 1/2 9390-96859 1 Grade 5
20 Capscrew 1/2-13UNC x 4 9390-111 1 Grade 5
21 Spacer Bushing 1 OD x 3/4 ID x 3/8 268905 2
22 Sleeve Bushing 3/4 OD x 1/2 ID x 2 3/8 268571 1
23 Locknut 1/2-13UNC 9003397 1 Grade 5
24 Cylinder Stop Weldment =Black= 268992B 1
25 Flat Washer 2" 93974 3
26 Retaining Ring 2" 91178 1
27 Defl ector Kit 272360 1 Includes Items 28, 29, 30
28 Angled Spout Weldment 272361B 1 For Service Only
29 Large Flange Screw, 5/16-18UNC x 3/4 91256 8 Grade 5
30 Large Flange Hex Nut, 5/16-18 91257 8 Grade 5
Directional Spout
(November 2015)