Brent 1082/882 — Operation
3-8
Hitching to Tractor (continued)
Electrical Connections
This cart is equipped with a seven-pin SAE con-
nector plug which will connect with the receptacle
found on most newer tractors. If your tractor does
not have this type of receptacle, an SAE J-560
seven-point socket can be purchased from your
Unverferth dealer (Part number 92824).
The wiring schematic for this cart, shown in
the MAINTENANCE section, complies with AS-
ABE Standards. Always verify correct electrical
function before using this cart.
Fig. 4
(July 2014)
To Next Page
Loading...
