To Next PageTo Next PageWhat to do if my BRIGHT Vacuum Cleaner is stuck?
If your BRIGHT Vacuum Cleaner gets stuck, remove the obstacle that is causing the problem. Then, move the vacuum cleaner to a different area and restart it.
How to fix Wi-Fi connection failure on BRIGHT Vacuum Cleaner?
If your BRIGHT Vacuum Cleaner fails to connect to Wi-Fi, verify that the Wi-Fi username and password are correct and that the SSID is set to 2.4 G. For a better connection, move the vacuum cleaner and your phone closer to the router.
How to fix roller brush error on BRIGHT Vacuum Cleaner?
To fix a roller brush error on your BRIGHT Vacuum Cleaner, remove and clean the roller brush, and then reattach it.
How to fix side-brush error on BRIGHT Vacuum Cleaner?
To fix a side-brush error on your BRIGHT Vacuum Cleaner, remove and clean the side brush, and then reattach it.
Why is my BRIGHT Vacuum Cleaner not returning to the charging base?
If your BRIGHT Vacuum Cleaner is not returning to the charging base, check that there is enough free space without any obstacles around the charging station. You can also manually place the vacuum cleaner in the charging station.
What to do if BRIGHT Vacuum Cleaner shows battery error?
If your BRIGHT Vacuum Cleaner displays a battery error, it means the battery temperature is too high or too low. Allow the battery to reach normal temperature before use.
How to fix caster wheel error on BRIGHT Vacuum Cleaner?
To fix a caster wheel error on your BRIGHT Vacuum Cleaner, check to see if the wheels are jammed. Remove anything that is stuck in the wheels and restart the vacuum cleaner.
How to fix impact sensor error on BRIGHT Vacuum Cleaner?
If your BRIGHT Vacuum Cleaner shows an impact sensor error, the bumper might be stuck. Tap the bumper repeatedly to release it. Then, move the vacuum cleaner to a different area and restart it.
What to do if my BRIGHT Vacuum Cleaner has wall-following error?
If your BRIGHT Vacuum Cleaner shows a wall-following error, clean the surface of the wall-following sensor.
How to fix cliff sensor error on BRIGHT Vacuum Cleaner?
If your BRIGHT Vacuum Cleaner shows a cliff sensor error, wipe the cliff sensor on the underside of the vacuum cleaner.
Provides safety guidelines for handling and using the rechargeable battery, including disposal and charging precautions.
Details safety instructions for the remote control batteries, covering type, usage, and disposal.
Lists all items included in the product packaging for the robot vacuum cleaner and its accessories.
Describes the functions and buttons of the remote control used to operate the vacuum cleaner.
Identifies and describes the main components of the robot vacuum cleaner unit itself.
Details the components and function of the charging station for the robot vacuum cleaner.
Explains how the robot vacuum cleaner automatically returns to the charging station when the battery is low.
Describes the different operating modes (Start, Stop, Sleep) and how to activate them.
Explains the default smart cleaning mode and how to activate it via the remote control.
Details how to initiate spiral cleaning mode for focused area cleaning.
Guides on activating edge cleaning mode to clean along walls and corners.
Instructions on how to clean and maintain the side brushes of the robot vacuum cleaner.
Steps for emptying and cleaning the dust container and its filters for optimal performance.
Guidance on how to remove, clean, and refit the main roller brush of the vacuum cleaner.
Step-by-step instructions for safely removing and replacing the battery in the robot vacuum cleaner.
General| Brand | BRIGHT |
|---|---|
| Model | 025971 |
| Category | Vacuum Cleaner |
| Language | English |
