21
•
•
•
•
•
•
•
1:
Outputs USB audio.
•
2:
Outputs SPDIF audio in stereo PCM.
•
3:
Outputs SPDIF audio in raw AC3.
•
4:
Outputs analog audio with SPDIF mirroring raw AC3.
(HD2000 only) audiochan #
(default is 2)
Since there are three analog outputs, you must also use the audiochan command if you selected
analog audio output:
•
audiochan 2:
Sets output 1 (this is not a typo).
•
audiochan 1:
Sets output 2.
•
audiochan 0:
Sets output 3.
volume #
(default is 100)
You can set the volume level by specifying a value between 0 and 100. For example:
volume 100
is full volume.
videomode <mode>
(HD110, HD210, HD410, HD810, and HD1010 default is 1024x768x75p;
HD2000 default is 1280x720x60p)
Set the output framebuffer format. The options are:
HD2000
•
VGA:
•
1024x768x60p
•
1280x768x60p
•
HDMI:
•
720x480x60p
•
720x576x50p
•
1280x720x60p
•
1280x720x50p
•
1920x1080x60i
To Next Page
Loading...
