87
•
•
•
•
•
•
•
If you named the file UPDATE.ROK, the file deletes when the update finishes and the unit
reboots.
NOTE:
If the card was formatted with NTFS or HFS+, then the UPDATE.ROK file does not delete and
the unit does not reboot after the update.
•
If you named the file UPDATE_SAVE.ROK, the upgrade file does not delete and the unit
does not reboot.
Generating HD content for an HD2000 using Final Cut Pro
From within Final Cut Pro:
1 Open an existing sequence or create a new one.
2 Add HD content to the sequence as needed.
3 Make sure audio tracks are enabled. If your project has no audio, add a Slug to one of the
audio tracks.
4 Select the portion of the sequence you want to export.
5 Select File > Export > Using Compressor.
In Compressor:
1 In the Settings window, go to the Settings tab.
2 Find Apple:Formats:MPEG-2:Program Stream and drag it onto your file in Compressor
(where it says Drag Settings and Destinations Here).
3 Select the program stream you just dragged onto your file.
4 Select your file.
To Next Page
Loading...
