83
•
•
•
•
•
•
USB keyboard is not responding
BrightSign works with many brands of USB keyboards. To use a keyboard, you must write a
custom script. The buttons supported by the AUTOPLAY.CSV are for input from the GPIO port.
1 Disconnect the keyboard from BrightSign and reconnect it.
2 Connect your keyboard to BrightSign using a USB hub.
3 Try a different USB keyboard.
Elo touch screen coordinates aren’t working properly
If the Elo coordinates appear to be reversed or flipped when using AUTOPLAY.CSV, try
the following:
1 Download version 1.1 or later of the Autoplay Script.
2 Open AUTOPLAY.CSV and add the FLIPELO keyword to the top of the interactive playlist.
3 Copy the updated AUTOPLAY.CSV and AUTORUN.BRS to your SD card.
4 Insert the SD card into your BrightSign and add power.
FLIPELO
IMAGEMODE
2
EVENTS elo:110:180:355:210
To Next Page
Loading...
