24
•
•
•
•
•
•
•
14:
Fades the image to the background color.
•
15:
Fades between the current image and the new image.
•
16 to 19:
Slides the image from top, bottom, left, and right.
GPIOEnableInput <GPIO number> (HD410, HD810, and HD1010 only)
Sets the specified GPIO port as an input port.
GPIOEnableOutput <GPIO number> (HD410, HD810, and HD1010 only)
Sets the specified GPIO port as an output port.
GPIOOn <GPIONumber>, <GPIONumber>,…
Turns on the specified GPIO outputs. All other GPIO output ports are turned off. Examples:
GPIOOn 0, 2, 4
Turns on GPIOs 0, 2, and 4. All other GPIO output ports are turned off.
GPIOOn
Turns off all GPIO output ports.
PauseMS #
Use this command when you want the playlist to pause for a specified number of milliseconds.
The number must be an integer. For example, to pause for 250 milliseconds, the command would
be:
PauseMS 250
PowerSaveModeOn
Turns off the syncs for VGA output and the DAC output for component video. For many monitors,
this causes the monitor to go into standby mode.
PowerSaveModeOff
Turns on the syncs for VGA output and the DAC output for component video.
To Next Page
Loading...
