Brinkmann Trailmaster - Step 9: Insert grease can holder through the hole; Step 10: Attach front table by sliding pegs; Step 11: Attach handle to the cooking chamber; Step 12: Attach firebox bracket to the wheel legs

8
Step 9
Insert grease can holder through the hole
inside the cooking chamber on the left
side to hang under the cooking chamber
as shown.
Step 10
Attach front table by sliding pegs into the
tracks on the cooking chamber as shown.
Step 11
Attach handle to the cooking chamber
using four M6 X 12 mm bolts and four
M6 nuts as shown.
Step 12
Attach firebox bracket to the wheel legs
using two M6 X 12 mm bolts as shown.
Grease Can Holder
Handle