BRINKS BHS 2000A - Programmable Options; Zone Options 1 and 2; Zone Options Location 156

PROGRAMMA B LE options
ZONE OPTIONS 1. 4 .
Restore Report Enable (6) - If enabled, zone will report a restore if a zone is restored.
Trouble Report Enable (4) - If enabled, zone will report a trouble if zone is violated.
Chimes Enable (2) - If enabled, violation of the burglary zone in the disarmed state will emit a tone at the
keypad.
Dialer Delay Enable (1) - If enabled, dialer will wait the programmed dialer delay time before calling the
tentral station. Does not apply to Cabinet/Tamper,Line cut, or Duress
ZONE OPTIONS 2
Double Dispatch key enable (4) - If enabled, two depressions of the same dispatch key will initiate an
alarm. Only programmable in locations 079,083, and 087.
Phone 2 Ileport (2) - If enabled, violation or condition will be reported to phone number 2.
Pholie I Ileport (1) - If enabled, violation or condition will be reported to phone number 1.
Zone options location i$6
Master code Reprogrammability (8) - If enabled, the master code can be changed by the user at the SCS.
Siren Exit tone (4) - If enabled, siren emits a pulsed tone during the exit time.
Dialer Delay Warning (2) - If enabled, the unit will sound a warning tone over the driver during the dialer
delay period. If disabled, the unit will delay the dialer message for the selected period but will sound the
standard ordinary local alarms immediately.
Automatic programming (1) - Automatically programs other locations based on zone types programmed
following rules established by Brinks.
22