Need help?Do you have a question about the BRIO CLTL520 and is the answer not in the manual?
Essential safety instructions for operating the water dispenser, including handling hot water and electrical safety.
Specifies operating environment, placement, and handling of the dispenser to prevent damage or hazards.
Details intended environments for use and restrictions for users with reduced capabilities.
Identifies and describes the various parts of the water dispenser through labeled diagrams.
Explains the function of the power indicator and the hot/cold water status lights.
Provides the height, width, and depth measurements of the water dispenser.
Details temperature ranges, tank capacities, and flow rates for cold and hot water.
Guidance on selecting a suitable, safe, and well-ventilated location for the dispenser.
Instructions for attaching the drip tray and grid to the water dispenser.
Step-by-step guide on how to properly place a water bottle onto the dispenser.
Instructions for powering the dispenser on and off, including switch activation.
Procedure for dispensing cold water using the designated faucet and button.
How to dispense hot water safely, including using the child safety lock feature.
Instructions on how to safely replace an empty water bottle with a new one.
Solutions for problems where the cold water is not dispensing or is not cold enough.
Solutions for problems where the hot water is not dispensing or is not hot enough.
Addresses common issues like unusual dispenser noise or bottle leaks.
Troubleshooting steps when the dispenser is not dispensing any water.
Guidance on cleaning the dispenser's tanks, cabinet, controls, and spouts.
Tips for proper care, including placement, avoiding moisture, and power saving.
Details the one-year limited warranty, coverage, exclusions, and claims process.
Essential safety instructions for operating the water dispenser, including handling hot water and electrical safety.
Specifies operating environment, placement, and handling of the dispenser to prevent damage or hazards.
Details intended environments for use and restrictions for users with reduced capabilities.
Identifies and describes the various parts of the water dispenser through labeled diagrams.
Explains the function of the power indicator and the hot/cold water status lights.
Provides the height, width, and depth measurements of the water dispenser.
Details temperature ranges, tank capacities, and flow rates for cold and hot water.
Guidance on selecting a suitable, safe, and well-ventilated location for the dispenser.
Instructions for attaching the drip tray and grid to the water dispenser.
Step-by-step guide on how to properly place a water bottle onto the dispenser.
Instructions for powering the dispenser on and off, including switch activation.
Procedure for dispensing cold water using the designated faucet and button.
How to dispense hot water safely, including using the child safety lock feature.
Instructions on how to safely replace an empty water bottle with a new one.
Solutions for problems where the cold water is not dispensing or is not cold enough.
Solutions for problems where the hot water is not dispensing or is not hot enough.
Addresses common issues like unusual dispenser noise or bottle leaks.
Troubleshooting steps when the dispenser is not dispensing any water.
Guidance on cleaning the dispenser's tanks, cabinet, controls, and spouts.
Tips for proper care, including placement, avoiding moisture, and power saving.
Details the one-year limited warranty, coverage, exclusions, and claims process.
General| Color | White |
|---|---|
| Heating Power | 500W |
| Frequency | 60Hz |
| Water Temperatures | Hot, Cold, Room Temperature |
| Capacity | 5 Gallon |
| Voltage | 110-120V |
To Next Page