7
Installation
1. Installation Overview
H
I
J
D
K
B
A
2. Connect to the Cold Water Supply
CAUTION: DO NOT CONNECT THIS WATER LINE TO A HOT WATER SUPPLY LINE. The water supply to the
unit MUST be from the COLD WATER LINE. Using HOT WATER will severely damage your filters.
A. Turn o and then disconnect the current cold
water supply line.
B. Connect the feed water adapter (D) to the cold
water supply line.
C. Connect the cold water supply line on top of
the feed water adapter (D).
NOTE: An extra adapter nut is included on top
of the feed water adapter (D) to attach to
a 3/8 in. or 1/2 in. feed plumbing line.
D
To Next Page
Loading...
