Bristol 671 - UNIT Subsystem

Model 671 User’s Manual REMOTE COMMUNICATIONS
Bristol Instruments, Inc. 45
:HELP:HEADers?
Description
Reads a list of all commands and queries supported by the instrument.
Each line of the response is terminated by a linefeed. The first line
indicates the number of bytes of help data that follow. The remaining
lines are strings of help data. All lines of data must be read before
continuing normal operations.
Query Response
#<integer>
<string>
<string>
<string>
...
<string>
Examples
:SYST:HELP:HEAD?
UNIT Subsystem
For the instrument, there is a single query and command in the UNIT subsystem { XE
“Commands:UNIT: }. This query affects the units that the SCPI interface uses for reporting
power.
UNIT Subsystem Functions
:UNIT:POWer?
Description
Queries the state of the power units that will be used when the SCPI
interface returns power values.
Query Response
{ DBM | MW }
Examples
:UNIT:POW?
:UNIT:POWer {DBM | W}
Description
Sets the state of the power units that will be used when the SCPI
interface returns power values. This setting does not affect the display.
*RST value
DBM
Examples
:UNIT:POW DBM
:UNIT:POW MW