Bristol 671 - Remote Communications; Web-based Display Application

Model 671 User’s Manual REMOTE COMMUNICATIONS
Bristol Instruments, Inc. 28
6 REMOTE COMMUNICATIONS
Web-based Display Application
The web-based display application allows remote connection to the 671 Laser
Wavelength Meter to easily provide a portable wavelength display. A 671 system with a
wired connection to a network can be accessed by any computer, tablet, or smart phone
connected to the same network.
1 Power on the 671 system and connect the NuView software to the instrument via
USB. These steps are described in steps 1-6 of the Operation Instructions
section.
2 Identify the IP address assigned to the instrument by first selecting Instrument
menu, then the Change IP Address item. Note the address, then close the
NuView software.
3 Plug one end of an Ethernet cable into the Ethernet port on the back panel of the
671 system, and the other end into the wireless router.
4 Connect the wireless device to the wireless network shared by the 671 system.
5 Open the wireless device’s web browser and enter the 671 system’s IP address.
The format for the IP address shown is
6 Once connection is initiated, the web-based display application will immediately
begin reporting wavelength and power measurements (if applicable).