Why are reference fringes low on Bristol Measuring Instruments?
This may be due to either a failing reference laser, or misalignment in the interferometer. If an error message is displayed, please call Bristol Instruments for additional information and/or instructions.
Outlines essential safety warnings and cautions for operating the instrument.
Details specific hazards and precautions to ensure safe operation of the instrument.
Provides steps for correctly connecting the instrument to a power source.
Describes the procedure for connecting a laser via a fiber optic cable.
Procedures for aligning the laser beam with the instrument's input aperture.
Step-by-step guide to connecting and starting the instrument's operational software.
Outlines the warranty period and terms for the instrument's coverage.
Lists and explains common error messages encountered during instrument operation.
Outlines essential safety warnings and cautions for operating the instrument.
Details specific hazards and precautions to ensure safe operation of the instrument.
Provides steps for correctly connecting the instrument to a power source.
Describes the procedure for connecting a laser via a fiber optic cable.
Procedures for aligning the laser beam with the instrument's input aperture.
Step-by-step guide to connecting and starting the instrument's operational software.
Outlines the warranty period and terms for the instrument's coverage.
Lists and explains common error messages encountered during instrument operation.
General| Accuracy | ±0.5% of span (typical) |
|---|---|
| Number of Pens | 1 or 2 |
| Display | Analog |
| Power Supply | 115/230 VAC, 50/60 Hz |
| Operating Temperature | 0 to 50°C |
To Next Page
