Bristol 621 - FIBER-OPTIC CLEANING INSTRUCTIONS; Fiber-Optic Cleaning Procedures

Model 621 User’s Manual APPENDIX F – FIBER-OPTIC CLEANING INSTRUCTIONS
Bristol Instruments, Inc. 37
APPENDIX F – FIBER-OPTIC CLEANING INSTRUCTIONS
General Information
Ensure that all fiber-optic connectors are clean and dry. The 621 Laser Wavelength Meter is
shipped with a fiber-optic cleaning kit consisting of a package of connector cleaning sticks,
clean wipes, and fiber-optic splice & connector cleaner spray.
Sticklers CleanWipes
1) Hold wipe in hand.
2) Spray wipe with Sticklers Fiber Optic Splice & Connector Cleaner.
3) Rub fiber against wipe.
4) Discard wipe.
Sticklers CLEANSTIXX Connector Cleaning Sticks
1) Tip can of Sticklers Fiber Optic Splice & Connector Cleaner. Press button to fill
orange cap well.
2) Moisten stick tip in well for one second. Do not saturate stick.
3) To clean fiber-optic input connector, rotate the stick 10 times.
4) Discard stick.