8
PLATINUM FILTER CONTENTS:
FOR MODELS 75,100,150, TO200, BIRM200,
YOU WILL EXPECT THE FOLLOWING.
SHIPPING CARTON QUANTITY 1
1. Control Valve
2. Pressure Tank
3. Parts Box
4. Owners Manual
5. Drain Hose & Clamp
(Not included in some brands)
2X 1”
Straight
Adapter
Bypass Tool
Drain Line
Gasket
2 X 1”
Elbow
Adapter
(Not
Included)
Transformer
Drain Hose Barb
Grease
Packet
Bypass with 4
Red Clips
2 x Clips
2. TANK
1. CONTROL
VALVE
Distributor
Tube Inside
the Tank
Media Inside
the Tank.
Media Type will
depend on what
models were
purchased
UNPACK & INSPECT PLATINUM FILTER
3. PARTS BOX
INSTALLATION
• Check the entire unit for any shipping damage or lost parts.
• Note any damage to the shipping cartons.
• Contact the transportation company for all damage and loss claims.
• The manufacturer is not responsible for damages in transit.
• Small parts needed to install the softener are in a parts box.
• To avoid loss of the small parts keep them in the parts bag until you are ready to install.
• Handle the softener unit with care.
• Do not drop the unit or set on sharp uneven projections on the floor.
• Do not turn the softener unit upside down.
NOTE
Only 8”, 9” & 10”
Pressure tanks
have plastic
sleeves.
8”, 9” & 10” tanks
come filled with
media & control
value attached
To Next Page
Loading...
