Installation: Forward-Facing
17
8 Kneel on the child restraint to force it
into the vehicle seat while pulling each
LATCH harness tight (Fig. D).
9 Verify that all connections are secure
and the restraint is stable.
•
Installation can be improved by the use of
the Versa-Tether
®
(see pages 23–25).
Removal
•
Release each LATCH harness from
the LATCH anchor by pressing the
red release button on the LATCH connector.
•
If connected, disconnect the Versa-Tether
®
from the tether
anchor.
•
When not in use, always store the LATCH connectors in
storage pouches
sewn in cover above rear-facing lock-offs.
WARNING:
Use vehicle belt (not LATCH connectors) for
installations with children weighing more than 48 pounds
(21 kg). Refer to the vehicle owner’s manual or contact the
vehicle manufacturer for the maximum weight rating for their
LATCH anchors. Unless specified otherwise by the vehicle
manufacturer, assume a 48-pound child is the vehicle LATCH
anchor limit.
D
To Next Page
Loading...
