Versa-Tether
®
23
WARNING:
WHEN USING THE RESTRAINT IN FORWARD FACING
MODE, ATTACH THE VERSA-TETHER ONLY TO TETHER ANCHORS
IDENTIFIED BY THE VEHICLE MANUFACTURER AS TETHER
ANCHORAGE POINTS. USE OF OTHER LOCATIONS IS NOT
APPROVED OR PERMITTED.
•
Britax
®
recommends that the tether be used at all times. Using
the tether will improve the stability of the child restraint and
reduce the risk of injury.
•
If the vehicle does not currently have a tether anchor
attachment, refer to the vehicle owner’s manual or contact
the vehicle manufacturer for assistance.
•
If a tether anchorage is not available, DO NOT modify the
vehicle without advice from the vehicle manufacturer.
•
DO NOT hook the Versa-Tether
®
to the bottom of a vehicle
seat adjuster!
•
Use of the tether in rear-facing installations is optional but
use will improve the stability of the child seat.
Using the Versa-Tether
®
1 Once the child restraint is in a secure, seat belted position, locate
the tether on the rear of the restraint.
2 Lift tether release tab; then pull to fully extend tether strap into a
V-shape.
3 Locate the hook on the strap.
To Next Page
Loading...
