Adjusting Harness Height
31
Harness Height Adjustment
1 Loosen the harness by lifting the harness
adjuster lever while pulling the shoulder
straps forward as far as possible (Fig. A).
2 From the rear of the child restraint,
unhook the shoulder harness from the
yoke (Fig. B).
3 Pull straps through the shell and cover,
to the front of the restraint.
NOTE:
Do not remove HUGS pads for
forward-facing use. Removal of HUGS is
optional for rear-facing use only.
4
Thread the harness straps through the
appropriate harness height slots (Fig. C).
5 Reattach harness straps to the yoke
(Fig. B).
6 Pull harness adjuster strap to tighten the
harness.
7 Verify that all straps are threaded at the
same height and are not twisted.
A
B
C
To Next Page
Loading...
