Securing Your Child
28
Once the child restraint has been
installed in the vehicle, follow these
instructions to secure the child.
1
Loosen the harness by lifting the adjuster
lever located in front of the restraint, then
pull the shoulder straps forward (Fig. A).
2 Unfasten the chest clip by
squeezing
the middle tab
(Fig. B).
3
Unfasten the buckle by pressing down on
the release button.
4
Move the harness straps to the side of
the restraint.
•
Use the harness holder located on the
straps and side of the cover to aid in hold-
ing the straps.
5
Place child in the restraint.
6 Position the harness straps around the
child and fasten the child restraint buckle
(Fig C) and chest clip (Fig. D).
•
Proper connection of the buckle is con-
firmed with a positive click after inserting
the second buckle tongue.
C
B
A
To Next Page
Loading...
