Installation: Forward-Facing
19
4 Rotate lever downward to open
forward-facing lock-off farthest from
where the vehicle belt is buckled.
5 Remove slack from the lap portion of
the vehicle belt.
6
Force the child restraint into the
vehicle seat while pulling the shoulder
portion of the vehicle belt tightly
through the lock-off (Fig. D).
7
Hold the shoulder belt tight, then
rotate the lock-off upward until secured
(
Fig. E)
.
8 Verify that all connections are secure
and the restraint is stable. A secure
restraint should allow no more than
1 inch of side-to-side or forward
movement at the belt path.
•
See Checking Buckle Position on
Page 26.
Removal
Open lock-offs, then unbuckle and remove vehicle belt from belt
path. Disconnect Versa-Tether
®
, if attached.
E
D
To Next Page
Loading...
