Britax STRIDER PLUS - Handle, Brake, and Tether System

13
8. TO OPERATE THE BRAKE
A To lock both rear
wheels, press the red brake
lever all the way down.
Push the Stroller back and
forth to confirm the wheels
are locked.
B To unlock both rear
wheels, firmly lift up the
brake lever all the way until
it locks into the up position.
WARNING - Always apply the brakes when parking the Stroller. The Stroller may roll away even
if left unattended for a few moments.
A There is an adjusting
button on the inside of each
handle moulding.
B Press both buttons in
together and hold. Now
rotate the handle up or
down to the desired height
position.
9. TO ADJUST THE PIVOTAL HANDLE - 7 POSITIONS
STROLLER ASSEMBLY & OPERATION
C
When the desired
height position has been
achieved, release both
buttons.