Britax STRIDER PLUS - Infant Carrier Attachment Procedures

32
29. INFANT CARRIER FITTING AND REMOVAL (SOLD SEPARATELY)
A Remove Stroller seat or Bassinet from frame, see
items 5B & 19E. The Infant Carrier must face the Stroller
handle. With the Infant Carrier handle in the upright
position, locate the Infant Carrier handle mouldings on
either side, directly over the frame mouldings. Notice the
indicator is GREEN.
B Push down on the
Infant Carrier and make
sure it is located in the
frame mouldings. The
Infant Carrier now needs to
be locked securely into the
frame.
INFANT CARRIER ASSEMBLY & OPERATION
WARNINGS:
s
$ONOTLEAVETHECHILDINTHECARRIERFOREXTENDEDPERIODS
s4HECARRIERISDESIGNEDTOPROVIDEMOBILITYOUTSIDEOFTHECARBUTITSHOULDNOTBE
used instead of an appropriate cot.
s%NSURETHECARRIERMUSTBECORRECTLYFITTEDANDLOCKEDINTOTHE3TROLLER
s4HECARRIERMUSTONLYBEUSEDWITHAN3#OR3TEELCRAFT3TROLLERWITHCOMPATIBLE
attachments.
s4OBEUSEDONLYINAREARWARDFACINGPOSITIONTHATISFACINGTOWARDTHE3TROLLERHANDLE
s5SEONLYFORACHILDWEIGHINGUPTOKGSANDWITHALENGTHOFUPTOMM
s2EMOVE)NFANT#ARRIERFROM3TROLLERFRAMEBEFOREFOLDING