Britax STRIDER PLUS - 12 To Fit the Armbar

16
12. TO FIT THE ARMBAR
A One side at a time,
align the armbar pin with
the frame moulding as
shown.
B Press in and hold the
engaging / release button,
then insert the pin all the
way in.
WARNING: When a child is in the Stroller, keep the armbar attached to the frame at all times.
C Release the button,
then pull on the armbar to
make sure it is engaged.
Repeat steps A, B & C for
the other side.
STROLLER ASSEMBLY & OPERATION
D The armbar can be
r
eleased on one side and
rotated out of the way
to assist with putting a
child in the Stroller. To
do this, press in and hold
the release button, then
disconnect one side of the
armbar.
E Rotate the armbar clear
of the Stroller seat. Lock the
armbar back into position
after fastening the child in
the harness.