27
27. TO FIT THE RAINCOVER
A1 To fit the raincover to
the Stroller - Place over the
Stroller canopy as shown.
Loop the elastic section
over the Stroller seat leg
support.
A2 Pull the rear raincover
section down between the
handle and down the back
of the Stroller.
A3 Join the hook and pile
around the handle tube.
A4 The raincover can be
fitted to the Stroller seat
when in forward or rear
facing mode.
B1 To fit the raincover to
the Stroller and Second
Seat - Follow step A1,
then pull the rear raincover
section down between the
handle and over the back of
the Second Seat as shown
above. Attach the hook
and pile as described in A3
above.
C1 To fit the raincover to
the Infant Carrier - Place
over the Infant Carrier
canopy as shown. The
elastic section will hang
over the front of the Stroller.
STROLLER ASSEMBLY & OPERATION
To Next Page
Loading...
