Britax STRIDER PLUS - Page 28

28
27. TO FIT THE RAINCOVER - CONTINUED
C2 Pull the rear raincover
section down between the
handle.
C3 Join the hook and pile
around the handle tube.
D1 To fit the raincover
to the Infant Carrier and
Second Seat - Follow
step C1, then pull the
rear raincover section
down between the handle
and over the back of the
Second Seat as shown
above. Attach the hook
and pile as described in C3
shown left.
E1 To fit the raincover to
the Bassinet - Place over
the Bassinet canopy as
shown. Loop the elastic
over the front of Bassinet.
E2 Join the hook and pile
around the handle tube.
STROLLER ASSEMBLY & OPERATION