Britax STRIDER PLUS - 17 To Fit, Use and Remove the Canopy

19
17. TO FIT, USE AND REMOVE THE CANOPY
A To attach the canopy,
slide the canopy mouldings
onto the frame mouldings
until they connect together.
B Attach the canopy
hook strips to the pile strips
around the top of the frame
for a secure fit.
C To adjust the canopy,
open by pulling forward,
or close by pushing it
backward.
STROLLER ASSEMBLY & OPERATION
D For extra protection,
pull visor out from under
front of canopy.
E To expose the mesh
section of the canopy,
unzip the center section.
F The zip should be fully
unzipped to expose the center
mesh section.