Britax STRIDER PLUS - 10 To Fit the Accessory Bag

14
10. TO FIT THE ACCESSORY BAG
A The bag firstly needs to
be attached to the pile strip
on the inside of the Stroller
basket.
B Hold the bag up by the
black back flap on the rear
side of the bag. Note the
hook strip on the edge of
the flap.
NOTE: Adjust the pivot handle up to create more assembly space (refer to section 9).
C Attach the hook strip to
the pile strip on the inside
of the basket. This will help
to keep it in place. Note:
this flap also contains two
pockets.
D Now thread each hook
strap through the frame
moulding as shown.
E Attach each strap to the
pile strips sewn on the bag to
hold in place.
F The accessory bag is
now ready for use. Return
the pivot handle to the
desired position.
STROLLER ASSEMBLY & OPERATION