30
28. BASSINET ASSEMBLY, FITTING AND REMOVAL - CONTINUED
I
Attach hook and loop
tabs on canopy to the
liner on both side and in
2 places near the main
locking lever.
J Line up plastic
moulding
on sides of
Bassinet with sockets
in the middle of Stroller
frame.
K Lower the Bassinet
all the way down until it
engages into the sockets
on both sides.
L Ensure Bassinet is
securely locked on by
trying to pull up.
BASSINET ASSEMBLY & OPERATION
H Fold canopy down
(refer to item 28D). Insert
the pad into the bassinet
with head rest located at
the canopy end.
G Fasten hook and loop
tabs around the handle
mouldings and stretch the
liner over the other two
corners of the bassinet.
NOTE: The bassinet can only be installed rearward (facing mother position) on the Stroller
frame. The frame will not fold with bassinet installed so it must be removed before folding.
To Next Page
Loading...
