The BRITONY COMBI is a fully automatic, wall mounted, low water content combination boiler. It is a room sealed,
fan assisted, balanced flued appliance providing central heating and mains pressure domestic hot water on
demand. It has electronic ignition and is suitable for all modern electrical control systems. The boiler is designed
for sealed systems only and a circulating pump, expansion vessel together with a pressure gauge and safety valve
are included within the boiler.
The standard horizontal flue kit is suitable for lengths 300 mm minimum to 610 mm maximum and includes an
elbow adapter that can be rotated through 360”. The horizontal flue can extend up to 3 metres using 1 metre flue
extension kits. 45” and 90” flue bends are also available as accessories.
The BRITONY
available.
COMBI
is
also suitable
for concentric vertical flueing and twin pipes. Adapters
and accessoiries
are
The boiler is packed in two cartons:
1. the boiler
2. the flue assembly and the pre installation kit
To Next Page
Loading...