ELECTRONIC PROGRAMER
Fig. 28
1. General Layout
In normal use the LCD display shows the day, the time and
control status. In other words whether the boiler is on or off,
whether it is permanently on or permanently off or whether the
override button has been pressed.
2. To Set the “On” and “Off” times
There is the facility for easy programming.
1. All seven days can be programmed as a block.
or
2. Monday to Friday as a block.
and then
3. Saturday and Sunday as a block
as well as
4. Changing the programme for any individual days.
It is advisable to clear the memory before starting. This is
done by pressing the reset button for a few seconds with a
pencil or similar implement. The screen will show all the
symbols.
.
q
chaffoteaux~
e-4A
To Next Page
Loading...